Precedente
Successivo
2000.35.015
This galvanically isolated DIN/B head temperature transmitter converts a signal acquired via PT100, PT1000, Ni100 or thermocouple probes into a 4..20 mA loop current signal (2-wire technology).
Programming is based on NFC technology and does not require a device power supply. The user can choose between a dedicated NFC programmer and the RF-Programmer software on a PC or the MyPixsys App on a smartphone available on the Play Store
2000.35.015 RFID CONVERTER TC-RTD TC/RTD - isolated - OUT 4...20MA
€72.59
Tax included
FEATURES
| Dimensions | Ø45mm, 23mm |
|---|---|
| Power supply | Loop Power (2 wires connection) operating range 6-32 Vdc |
| Operating conditions | Temperature -40..85 °C, Humidity 30..90 RH% |
| Material | Nylon (PA66) |
| Weight | Approx. 30g |
| Response time | 600mS (sampling 300mS) |
| Analog inputs | 1 x selectable among Thermocouples K,S,R,J,T,N,B,E - Thermoresistances PT100, PT1000, Ni100 - 2/3/4 wires |
| Data Logger Function | Sampling time 1..3600 S - 2800 damplings - circular buffer |
| Control algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional |
| Tuning | Manual or automatic |
| Alarm mode | Absolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm |
| Double P.I.D. | Heating / Cooling with dual P.I.D. |
| Soft-Start | Rising gradient programmable as Degree / Hour or fixed output % |
| Open/Close logics | Open / Close logic for motorized valves |
| Software parameter configuration | Memory Card, software LABSOFTVIEW, EASY-UP codes - Programming via APP (NFC) "MyPixsys" for Android and iOS devices |
| Rejection | 50-60Hz |
| Output resolution | 2 μA |
| Max. transmission error | 0,1% f.s or 0,2°C |
| Cable resistance | Max 20Ω |
| Over range output | f.s. + 5°C |
| Under range output | f.s. - 5°C |
| Error output | Selectable between 21,5mA or 3,8mA |
| Current output protection | 30mA |