Precedente
Successivo
DRR244-13ABC-T
PID Controller DRR244 stands out in the DIN-rail controller segment thanks to its comprehensive hardware and software features resulting in a single order code.
The analog input is programmable for temperature sensors such as resistance thermometers and thermocouples, or for current/voltage process signals frequently used by pressure transmitters, humidity and flow sensors or inverters.
The outputs are selectable as command , multiple alarm modes or analogue retransmission.
For applications within networks the serial port is RS485 with Modbus RTU/ Slave protocol.
The extended range power supply from 24 to 230V AC/DC with galvanic isolation makes it suitable even in case of oscillation in the power grid.
In addition to its function as a hot-cold PID controller, DRR244 also finds application as a signal converter due to the availability of analog output galvanically isolated from the input, which can be used for retransmission of process value or setpoint .
Like the other models in the Blue Line series, DRR244 is programmable with MyPixsys App via NFC/RFID communication.
DRR244-13ABC-T DIN RAIL CONTROLLER MULTI-SETPOINT 4+5 digit 1AI-1AO-2DI-2DO-3 RELAYS RS485
€299.51
Tax included
FEATURES
| Dimensions | 71 x 90 x 64 mm - 4 x DIN43880 modules |
|---|---|
| Power supply | 24..230V AC/DC ±15% 50/60 Hz - galvanic isolation 2,5KV |
| Consumption | 9 Watt/VA |
| Operating conditions | Temperature 0..45 °C, humidity 35..95 RH% (non-condensing), max 2000m a.s.l. |
| Material | Box: polycarbonate V0. Front cover: silicone rubber |
| Weight | Approx. 210g |
| Sealing | Box and terminal blocks: IP20 |
| According to | CE |
| Analog inputs | 1x 16bit, K,S,R,J,T,N,B (autom. comp. of cold joint -25..85°C, ±0,2% F.S. ±1 digit F.S.), PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B3435K), 0..10 V, 0/4..20mA, 0..60 mV, Potentiometers 1..150KΩ |
| Sampling time | Programmable up to 2,1ms (frequency up to 470Hz) |
| Digital outputs | 2 x PNP 12/24V DC - 30mA max |
| Auxiliary output | 12/24 VDC - 30mA max for sensor supply |
| Relais outputs | 2x 5A - 250V AC resistive loads, 1x 2A - 250V AC resistive loads |
| Analogue outputs | 1 x 4..20mA (40000 points ± 0,2% F.S ) or 0..10VDC (40000 points ± 0,2% F.S.) |
| Control algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional |
| Tuning | Manual or automatic |
| Alarm mode | Absolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm |
| Double P.I.D. | Heating / Cooling with dual P.I.D. |
| Soft-Start | Rising gradient programmable as Degree / Hour or fixed output % |
| Open/Close logics | Open / Close logic for motorized valves |
| Software parameter configuration | Memory Card, software LABSOFTVIEW, EASY-UP codes - Programming via APP (NFC) "MyPixsys" for Android and iOS devices |
| Digital inputs | 2 x PNP |
| Serial communication | RS485 (1200..115200 Baud) galvanically isolated |
| Communication protocols | Modbus RTU |
| USB | 1 x microUSB (for programming via MyPixsysLab software) |
| TA input | 1x T.A. 50 mA, 800 μs - 4096 points |