Previous
Next
ATR244-13ABC
ATR244-13ABC CONTROLLER MULTI-SETPOINT 48X48 4+5 digit 1AI-1AO-2DI/O - 3 RELAYS
€220.00
FEATURES
| Dimensions | 48x48x105mm |
|---|---|
| Power supply | 24..230V AC/DC ±15% 50/60 Hz - galvanic isolation 2,5KV |
| Consumption | 6 Watt/VA |
| Operating conditions | Temperature 0..45 °C, humidity 35..95 RH% (non-condensing), max 2000m a.s.l. |
| Front panel | 48 x 48mm |
| Material | Box: PC UL94V2 self-extinguishing, front panel: PC UL94V2 |
| Weight | |
| Sealing | Front panel: IP65, Box and terminal blocks: IP20 |
| According to | CE, UL |
| Analog inputs | 1x 16bit, K,S,R,J,T,N,B (autom. comp. of cold joint -25..85°C, ±0,2% F.S. ±1 digit F.S.), PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B3435K), 0..10 V, 0/4..20mA, 0..60 mV, Potentiometers 1..150KΩ |
| Sampling time | Programmable up to 2,1ms (frequency up to 470Hz) |
| Digital outputs | 2x SSR 12 / 24 V DC - 25 mA max |
| Relais outputs | 3 x 2A - 250V AC resistive loads |
| Analogue outputs | 1 x 4..20mA (40000 points ± 0,2% F.S ) or 0..10VDC (40000 points ± 0,2% F.S.) |
| Control algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional |
| Tuning | Manual or automatic |
| Alarm mode | Absolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm |
| Double P.I.D. | Heating / Cooling with dual P.I.D. |
| Soft-Start | Rising gradient programmable as Degree / Hour or fixed output % |
| Open/Close logics | Open / Close logic for motorized valves |
| Software parameter configuration | Memory Card, software LABSOFTVIEW, EASY-UP codes - Programming via APP (NFC) "MyPixsys" for Android and iOS devices |
| Digital inputs | 2 x PNP |
| Communication protocols | Modbus RTU |
| USB | 1 x microUSB (for programming via MyPixsysLab software) |
| Programmer function | Cycle with up to 12 steps and end-of-step recovery/waiting functions |